Ultra-high Capacity (400Te) Coiling Solution: Under-rollers
Our client’s challenge Oceaneering identified a need to modernise their...
All Products
MC400
| Technical Specification | ||
|---|---|---|
| Feedstock | Aluminium | Copper |
| Typical maximum product speed | 100m/min | 100m/min |
| Feedstock | ∅12.5 to 25mm | ∅12.5 to 19mm |
| Maximum product width | 80mm | 80mm |
| Maximum product thickness | 60mm | 60mm |
| Maximum cross section area | 4,800mm2 | 4,800mm2 |
| Typical output | 1,800kg/h | 1,700kg/h |
| Process scrap (Flash) | 0% for solid and some tube products | 5-8% |
| 0-10% for some tubes and sheathed/clad products |
Notes:
1. The above information is based on a standard machine, extrusion shoe and tooling, and for ‘typical’ products
2. Aluminium feedstock ∅12.5 to 15mm can be single or twin feed (product dependant), above ∅15mm single feed only
3. In addition to solid feedstock granular feed is also possible
| Machine Features |
|---|
| Hydraulically actuated dynamic shoe positioning |
| Dynamic hydraulic rear clamp |
| Extrusion shoe heating (if application requires) |
| Automatic shoe load and unload |
| Oil cooled main shaft bearings |
| Internally water cooled main shaft bearing hubs |
| Hydraulically actuated coining roll positioning |
| Machine Applications | |
|---|---|
| Profiles | |
| Busbars | |
| Lightning conductor | |
| Magnet wire | |
| Transformer wire | |
| Trolley wire | |
| Aluminium clad steel wire | |
| Optical ground wire (Aluminium only) | |
| Parallel flow condenser / Multiport Tube (Aluminium only) | |
| Refrigeration tube (Aluminium only) | |
| Automotive tube (Aluminium only) | |
| Special applications |
Case Studies
Ultra-high Capacity (2000Te) Carousel Feed System
Our client’s challenge nkt cables were building a new factory...
Cable Engines – Cable Production Ancillaries
The customer JDR Cable Systems is a leading supplier of...
Continuous Rotary Extrusion Line Extrusion of Copper Profile
