All Products

MC500

6

Technical Specification
Feedstock Aluminium Copper
Typical maximum product speed 100m/min 100m/min
Feedstock ∅12.5 to 25mm ∅12.5 to 19mm
Maximum product width 160mm 160mm
Maximum product thickness 60mm 60mm
Maximum cross section area 9,600mm2 9,600mm2
Typical output 2,000kg/h 3,000kg/h
Process scrap (Flash) 0% for solid and some tube products 5-8%
0-10% for some tubes and sheathed/clad products

Notes:
1. The above information is based on a standard machine, extrusion shoe and tooling, and for ‘typical’ products
2. Aluminium feedstock ∅12.5 to 19mm can be single or twin feed (product dependant), above ∅19mm single feed only
3. In addition to solid feedstock granular feed is also possible

Machine Features
Hydraulically actuated dynamic shoe positioning
Dynamic hydraulic rear clamp
Extrusion shoe heating (if application requires)
Automatic shoe load and unload
Oil cooled main shaft bearings
Internally water cooled main shaft bearing hubs
Hydraulically actuated coining roll positioning
Machine Applications
Profiles
Busbars
Lightning conductor
Trolley wire
Refrigeration tube (Aluminium only)
Automotive tube (Aluminium only)
Special Applications